지원되는 프린터 목록
GrabCAD Print는 다양한 프린터에 연결할 수 있습니다. 3D 프린터 연결에 문제가 있는 경우 아래의 프린터 목록에 해당 프린터가 나와 있는지 확인하십시오.
제조사 |
모델 |
조형 기술 |
Stratasys | F123 Series (F370 CR, F190 CR, F770, F370, F270, F170 and F120) F900 F3300 Fortus (900mc, 450mc, 380mc, 380mc CFE, 400mc, and 360mc) |
FDM |
J8-Series J7-Series J5-Series J3-Series J4100 Connex3 — 모든 유형 Objet30 — 모든 V3 및 V5 모델, Dental Objet1000 Plus 제외 |
Polyjet | |
H350 | 사프 | |
오리진 원 오리진원치과 |
P3 | |
Neo800 Neo450s Neo450e |
Stereolithography |
Dimension, uPrint and Fortus 250mc printers are available and can be programmed in GrabCAD Print but are no longer supported by Stratasys. Any printer-specific issues will not be investigated.
F370, F370 CR, F770, F900 및 더 큰 Fortus 시스템에서 인쇄하는 경우 Insight를 사용하여 수동 서포트 제거와 같은 고급 인쇄 준비 기능에 액세스할 수 있습니다. 참고 항목: Insight and Control Center를 통한 고급 인쇄 준비.